STC-3008 AC 110-220V Dual Display Digital Thermostat Temperature Controller

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
STC-3008 AC 110-220V Dual Display Digital Thermostat Temperature Controller
Popular
Popular
Product Introduction
Description:
Power supply:
AC110V-220V
● Measurement temperature range: -55°C ~ +120°C
● Resolution: 0.1
● Accuracy: ±1°C
● Relay output contact capacity: heating: 10A/240VAC, cooling: 10A/240VCA
● Sensor h type: imported NTC sensor, line length 1 meter
● Shell material: gray ABS flame retardant plastic shell
● Net weight: 120g
● Gross weight: 140g
Set startup temperature:
Press the "up" button once to display the starting temperature. Long press the "up" button for about 3 seconds,The required temperature can be set by the up and down keys
Set the stop temperature:
Press the button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the up and down keys
Press "Up 1" Button & "Up 2"Button at the same time to setting mode
Code
Function
Set Range
Default
P0
Compressor 1 delay time
0-60min
0min
P1
Compressor delay time
0-60min
0min
P2
High temperature alarm value
55-120° C
120°C
P3
Low temperature alarm value
55-120° C
-55°C
How to restore factory Settings
Press the "Down 1" and "Down 2" button at the same time,  the factory setting is restored
Package Included:
1PC x Temperature Controller
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
STC-3008 AC 110-220V Dual Display Digital Thermostat Temperature Controller
Product Introduction
Description:
Power supply:
AC110V-220V
● Measurement temperature range: -55°C ~ +120°C
● Resolution: 0.1
● Accuracy: ±1°C
● Relay output contact capacity: heating: 10A/240VAC, cooling: 10A/240VCA
● Sensor h type: imported NTC sensor, line length 1 meter
● Shell material: gray ABS flame retardant plastic shell
● Net weight: 120g
● Gross weight: 140g
Set startup temperature:
Press the "up" button once to display the starting temperature. Long press the "up" button for about 3 seconds,The required temperature can be set by the up and down keys
Set the stop temperature:
Press the button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the up and down keys
Press "Up 1" Button & "Up 2"Button at the same time to setting mode
Code
Function
Set Range
Default
P0
Compressor 1 delay time
0-60min
0min
P1
Compressor delay time
0-60min
0min
P2
High temperature alarm value
55-120° C
120°C
P3
Low temperature alarm value
55-120° C
-55°C
How to restore factory Settings
Press the "Down 1" and "Down 2" button at the same time,  the factory setting is restored
Package Included:
1PC x Temperature Controller
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.