New Geist RSMINI-P Temperature Monitor Plus 100-240V

Description

New, with Certificate of Performance
Description:
The RSMini-P environmental monitor provides Web-based remote surveillance, logging and graphing of temperature and connected sensors. RSMini-P supports 16 additional sensors using splitters available at low cost. It is especially useful for monitoring environmental conditions in critical applications such as data center aisle rack monitoring, computer server rooms, network closets, laboratories and other critical facilities.
Easily view and log temperature and other connected sensors over the intranet or the Web. No software required– securely access the graphical user interface from a Web browser. Mounts with four screw holes. Power adapter included. Supports both digital and analog sensors (CCAT required for analog sensors). RSMini-P supports the IOE and Remote Power Manager X2.
Product Highlights:
SNMP, Email, and SMS Alerts
The RSMini-P can trigger escalating alarms if temperature and other measurements fall outside of specified thresholds via SNMP (v1, v2c, v3), email and SMS messages (email to SMS gateway). For example, specify an email notification to one or more users at 70° F, add another layer of personnel to an additional email alarm at 80° F, add your third party contractor at 85° F, etc. You can specify up to 200 alarms per unit.
View Charts and Graphs on the Web
RSMini-P allows active Web pages to display real–time readings and graphs of temperature and connected sensors in addition to data logs in standard format (downloadable as XML or CSV file). Graphing scales are fully adjustable.
Interface Network IP Cameras
The Web page interfaces up to four IP cameras (not included), allowing you a quick view of remote conditions– especially useful in the event of an alarm.
No Software Required
The RSMini-P is simple to install and use, requiring no special software other than a standard Web browser. It connects to an Ethernet network with a standard RJ45 connector and sends data in standard TCP/IP packets. It is easily configured with a simple menu using a Web browser and can be password protected with three access account level types: Administrator, Control, and View Only. Users can securely access the monitor by entering its IP address.
Specifications:
On-board Sensors:
T
emperature: -22 to 185° F (-30 to 85° C), +/- 0.5° C
Remote Sensor Support Digital sensor: 1 port (supports 16 sensors, 600 FT maximum aggregate length)
Physical: 4” L x 1.5” H x 1.5” W, 0.5 pounds
Power:
6VDC
with 48VDC input
(supplied wall transformer)
Ethernet: 10 Mbps, RJ-45 receptacle
Real–Time Clock (RTC) with power backup
Reset IP push-button: restores factory defaults
Software Features:
Please note the information contained herein is for informational purposes only. Technical claims listed depend on a series of technical assumptions. Your experience with these products may differ if you operate the products in an environment, which is different from the technical assumptions. Geist reserves the right to modify these specifications without prior notice.
Geist makes no warranties, express or implied, on the information contained in this document.
Please note the information contained herein is for informational purposes only. Technical claims listed depend on a series of technical assumptions. Your experience with these products may differ if you operate the products in an environment, which is different from the technical assumptions. Geist reserves the right to modify these specifications without prior notice. Geist makes no warranties, express or implied, on the information contained in this document.
HTTP/HTTPS:
Web access
Alarms:
high/low values, multiple thresholds per sensor
ESMTP / POP3
: email alerts, ESMTP / POP3 auth
SNMP (v1, v2c, v3):
Gets, traps and clears alerts, MIB
Paging:
email to pager proxy
XML
: meta-tagged sensor values, alarms, config
Syslog
: send debug messages to Syslog server
Web interface:
4 styles to choose from
Access-control:
3 access levels (view, control, admin)
Web cams
(optional): Up to four can be displayed