AC 110V 10A Pre-wired Digital F Temperature Controller Brew Thermostat Control

Description

ads
AC 110V/240V Mini Plug-n-play Temperature Controller
Plug-n-play: No worry about wiring!
From 2016.10.18, the controller was updated: Simplified Operation, Larger Power, Wider control range. Standard U.S. outlet, Enhanced waterproof sensor probe. Get the new version right now!
There's 1 relays on this controller. Refrigeration and heating mode can be set through the menu. Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, bolier, steamer, industrial equipments and other temperature-controlled systems.
Please be noted that the controller itself doesn't change temperature. You need to use heater or refrigeration equipment with it.
As shown in the video, we set the controller to control a freeze and keep temp between 88 and 92 degree. Just need to set HC=C(cooling mode), Lb=88, Hb=92
Video for Setting:
https://www.youtube.com/v/AWIVUW7TnC4
Specifications:
Measure range: -4°F ~ +220°F(-20°C ~ 105°C)
High Resolution: 0.1°F/C / 1°F/C(Adanced setting)
Accuracy: ±0.1°F/C
Power supply: AC 110V ~ 240V , 50/60Hz
Power consumption: less than 3W
Relay contact capacity: 10A/220VAC, 10A/110VAC
Data retention: Yes
Compressor delay protection: YES
Advanced function(Please do'nt change the default setting if you do not need them)
Switch temperature unit(Default:Fahrenheit) : Fahrenheit or Centigrade.
Switch resolution(Default:0.1°F/C) : 0.1°F/C or 1°F/C.
Auto shut off timer
For DIY incubation, aquarium, sous vide, etc.
Size:
Product size:12.5cm(L) x 9.1cm(W) x 4.5cm(H) / 4.9" * 3.6" * 1.8"
Sensor Cable length: 3m / 9.8ft(include the probe)
Package Include:
1 x temperature controller
1 x NTC sensor (3m cable)
1 x Power cord w/
US Plug
1 x English Manual